Abrasives.

Dry sanding paper sheets

230 × 280 mm; P60–P400 — subject to confirmation

For staged dry sanding before finishing. Select a grit sequence that removes scratches from the previous step.

Wet & dry sandpaper sheets

230 × 280 mm; P400–P2000 — subject to confirmation

For fine surface preparation using an approved wet or dry process. Confirm workpiece and coating compatibility.

Fine finishing paper assortment

P800 / P1000 / P1500 / P2000; mixed pack — subject to confirmation

A mixed-grit assortment for progressive finishing. Test on a small area before sanding the complete surface.

Hook-and-loop sanding discs

125 / 150 mm; P40–P400 — subject to confirmation

A practical disc format for random-orbit sanding. Match the diameter and extraction-hole layout to the machine pad.

Mesh sanding discs

125 / 150 mm; P80–P400 — subject to confirmation

An open mesh format for use with a compatible extraction system and interface pad.

PSA sanding discs

125 / 150 mm; P80–P320 — subject to confirmation

Adhesive-backed discs for compatible pads. Keep the backing surface clean and follow the pad supplier instructions.

Dry abrasive paper roll

115 mm × 5 m; P60–P240 — subject to confirmation

Cut the required length for hand blocks or compatible sheet sanders.

Abrasive cloth roll

25 / 50 mm × 25 m; P60–P400 — subject to confirmation

Flexible cloth stock for manual deburring and finishing of suitable edges and profiles.

Hook-and-loop abrasive roll

115 mm × 5 m; P80–P320 — subject to confirmation

Cut to suit compatible hand blocks and sanding pads; check the attachment area before use.

Portable sander belt

75 × 533 / 75 × 457 mm; P40–P180 — subject to confirmation

For portable belt sanders using the specified belt dimensions. Match belt tracking and direction to the machine.

Narrow file sanding belt

13 × 457 / 10 × 330 mm; P60–P240 — subject to confirmation

A narrow belt format for compatible power files and detail work.

Bench sanding belt

100 × 610 / 100 × 915 mm; P60–P240 — subject to confirmation

For compatible bench sanding equipment. Verify machine dimensions, belt joint and material before ordering.

Four-sided sanding sponge

100 × 70 × 25 mm; P60–P220 — subject to confirmation

Four abrasive faces support hand sanding of flat surfaces and edges.

Angled sanding sponge

Angled profile; coarse / medium / fine — subject to confirmation

An angled edge helps reach corners and moulding profiles during preparation.

Flexible sanding sponge sheet

140 × 115 mm; P180–P600 — subject to confirmation

Flexible backing follows contours during hand finishing; confirm the required surface finish on a sample.

General-purpose abrasive hand pad

152 × 229 mm; medium grade — subject to confirmation

For hand cleaning and blending where a flexible pad is useful. Validate the finish on the chosen material.

Fine finishing hand pad

152 × 229 mm; fine / very fine — subject to confirmation

For lighter surface conditioning after coarser preparation. Colour and grade definitions must be confirmed with the supplier.

Non-woven abrasive roll

100 / 115 mm width; 10 m roll — subject to confirmation

Cut into pads for workshop use. Agree grade and finished-surface sample before selecting a production batch.

Aluminium oxide flap disc

115 / 125 mm; 22.23 mm bore; P40–P120 — subject to confirmation

A general-purpose flap format for edge preparation and weld blending.

Zirconia flap disc

115 / 125 mm; 22.23 mm bore; P40–P120 — subject to confirmation

A zirconia option for material-removal and blending tasks. Select form, grit and workpiece compatibility together.

Ceramic abrasive flap disc

115 / 125 mm; 22.23 mm bore; P40–P80 — subject to confirmation

A ceramic abrasive option for fabrication work. Compare samples under the intended operating conditions.

Thin metal cutting disc

115 / 125 × 1.0 × 22.23 mm — subject to confirmation

A thin cutting-wheel format for suitable metal sections. Use only for cutting, with the correct guard and machine.

Stainless-steel cutting disc

115 / 125 × 1.0 × 22.23 mm — subject to confirmation

A sourcing option for stainless work. Confirm composition and contamination requirements rather than relying on label colour.

Large-diameter cutting disc

180 / 230 mm; thickness and bore to confirm — subject to confirmation

For equipment specifically rated for the selected diameter. Verify the wheel label, bore and machine compatibility.

Depressed-centre metal grinding wheel

115 / 125 × 6 × 22.23 mm — subject to confirmation

A depressed-centre wheel format for approved grinding operations and compatible guards.

Large metal grinding wheel

180 / 230 × 6 × 22.23 mm — subject to confirmation

For compatible larger grinders. Confirm the machine rating and wheel specification before selecting.

Masonry grinding wheel

115 / 125 mm; thickness and bore to confirm — subject to confirmation

A masonry-grinding sourcing option. Confirm workpiece, dust-control requirements and operating limits for the final wheel.

Cordless angle grinder

Powered grinding equipment for surface preparation and finishing.

Cordless finishing sander

Cordless sanding equipment for staged surface preparation.

Cordless orbital sander

Cordless sanding equipment for staged surface preparation.

Cordless concrete finishing tool

Powered equipment for finishing and surface treatment.

Cordless right-angle grinder

Powered grinding equipment for surface preparation and finishing.